Current through Register Vol. 54, No. 50, December 14, 2024
Section 251.2 - Location of replacement VIN platesEvery owner to whom the Department issues a State replacement VIN plate shall immediately upon its receipt attach the plate to the vehicle according to the following rules:
(1) On motorcycles, to the frame in the area of the steering head, on the left side.(2) On motor vehicles not having a front engine compartment, to the firewall in the engine compartment as close to the top as possible.(3) On all motor vehicles other than specified in paragraphs (1) and (2), to the firewall under the hood on the extreme right (passenger) side, as close to the top of the firewall as possible.(4) On house, utility, boat and similar trailers, to the right front of the tongue, not on the hitch assembly.(5) On semitrailers other than those enumerated in paragraph (4), to the extreme lower right part of the front of the trailer, not on the frame or rail.