Current through Register Vol. 54, No. 45, November 9, 2024
Section 1017.83 - Procedure to place a stand-by vehicle into service(a) A fleet owner shall first register the designated vehicle as a stand-by vehicle as follows: (1) The vehicle shall be commercially registered with the Department of Transportation in the medallion certificate holder's name and insured under medallion certificate holder's current policy that is on file with the Authority.(2) Complete and file Form SB-2 "Stand-By Vehicle Application" with the TLD Enforcement Department and remit payment of the Authority compliance inspection fee as provided § 1001.43 (relating to Authority fee schedule). Form SB-2 may be obtained on the Authority's web site at www.philapark.org/tld.(b) The fleet owner shall then present the vehicle to the TLD Enforcement Department for an Authority compliance inspection under § 1017.31(a) (relating to vehicle inspections by the Authority). Upon passing inspection, the vehicle will be assigned a unique number (that is, SBV-01, and the like).(c) When a fleet owner elects to place a stand-by vehicle into taxicab service and prior to its entry into taxicab service, the fleet owner shall first notify the Manager of Enforcement by email and include the medallion number that is at issue, the stand-by vehicle number that will be in temporary service for that medallion, the date the disabled taxicab was being removed from service and the reason for the use of the stand-by vehicle. The Manager of Enforcement may authorize the medallion owner to remove the medallion consistent with § 1013.3 (relating to removal of a medallion). This section cited in 52 Pa. Code § 1017.82 (relating to use of stand-by vehicles).