25 Pa. Code § 266b.39

Current through Register Vol. 54, No. 25, June 22, 2024

Section 266b.39 - Labeling/marking

In addition to the requirements incorporated by reference in 40 CFR 273.34 (relating to labeling/marking), a large quantity handler of universal waste shall label:

(1) Each container of universal waste oil-based finish, or the container in which universal waste oil-based finishes are contained, with "universal waste oil-based finish" or "waste oil-based finish."

(2) Each container of universal waste photographic solutions, or the container in which universal waste photographic solutions are contained, with "universal waste photographic solutions" or "waste photographic solutions."

25 Pa. Code § 266b.39

The provisions of this § 266b.39 adopted January 9, 2009, effective 1/10/2009, 39 Pa.B. 201.

The provisions of this § 266b.39 adopted under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. §§ 6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. §§ 6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. §§ 691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. §§ 510-20).