Current through Register Vol. 54, No. 45, November 9, 2024
Section 288.214 - Measurement and inspection of waste(a) For a noncaptive facility that has received, is receiving or will receive 30,000 or more cubic yards of solid waste in a calendar year, the following apply: (1) Except as provided in paragraph (2), the operator shall weigh solid waste when it is received. The scale used to weigh solid waste shall conform to 3 Pa.C.S. Chapter 41 (relating to Consolidated Weights and Measures Act) and 70 Pa. Code Part I (relating to weighmaster). The operator of the scale shall be a licensed public weighmaster under 3 Pa.C.S. Chapter 41 and 70 Pa. Code Part I.(2) The Department may approve, in the permit, an alternative method of accurately measuring waste when it is received.(b) For other facilities, solid waste received or disposed of at the facility shall be accurately weighed or otherwise accurately measured.(c) The operator shall inspect and monitor incoming waste to ensure that the disposal of waste is consistent with this article.The provisions of this §288.214 amended January 12, 2001, effective 1/13/2001, 31 Pa.B. 235. This section cited in 25 Pa. Code § 288.132 (relating to operation plan).