Current through Register Vol. 54, No. 25, June 22, 2024
Section 288.232 - Daily cover(a) Except as provided in subsection (b), a uniform cover of the approved daily cover material shall be placed on exposed solid waste at the end of each working day, at the end of every 24 hours, or at the completion of every lift, whichever interval is less.(b) The Department may waive the daily cover material requirements of this section in the permit if the operator demonstrates that the composition of solid waste disposed at the facility prevents vectors, odors, blowing litter and other nuisances, is noncombustible and allows loaded vehicles to successfully maneuver over it after placement without change in its properties and without regard to weather.(c) The composition of the daily cover material shall meet the following performance standards. The daily cover shall:(1) Prevent vectors, odors, blowing litter and other nuisances.(2) Cover solid waste after it is placed without change in its properties and without regard to weather.(3) Be capable of allowing loaded vehicles to successfully maneuver over it after placement.(4) Be capable of controlling fires.(5) Be consistent with the waste acceptance plan for the facility.(d) A 5-day supply of cover material shall be maintained on the site.The provisions of this § 288.232 amended January 12, 2001, effective 1/13/2001, 31 Pa.B. 235. This section cited in 25 Pa. Code § 288.141 (relating to compaction and cover plan).