Current through Register Vol. 54, No. 25, June 22, 2024
Section 130.459 - Notification of modifications to an ACP by the responsible ACP party(a)Modifications that do not require Department preapproval. The responsible ACP party shall notify the Department, in writing, of a change in the following with respect to an ACP product: (5) Applicable product category.(9) Recommended product usage directions.(b)Notification. The notification shall be submitted no later than 15 working days from the date the change occurs. For each modification, the notification shall fully explain the following: (1) The nature of the modification.(2) The extent to which the ACP product formulation, VOC content, LVP content or recommended usage directions will be changed.(3) The extent to which the ACP emissions and ACP limit specified in the ACP agreement will be changed for the applicable compliance period.(4) The effective date and corresponding date-codes for the modification. This section cited in 25 Pa. Code § 130.211 (relating to table of standards); 25 Pa. Code § 130.373 (relating to additional labeling requirements for aerosol adhesive; adhesive remover, electrical cleaner, electronic cleaner, energized electrical cleaner and contact adhesive products); 25 Pa. Code § 130.464 (relating to treatment of information).