Current through Register Vol. 54, No. 25, June 22, 2024
Section 149.3 - Installation standard for new manufactured homes(a) In accordance with the Manufactured Housing Construction and Safety Standards Act of 1974 (42 U.S.C.A. §§ 5401-5426), a manufacturer of a new manufactured home shall provide a copy of the manufacturer's approved design, which includes instructions for the installation of the new manufactured home, with each home.(b) In accordance with the Manufactured Housing Construction and Safety Standards Act of 1974, a new manufactured home shall be installed consistent with the manufacturer's approved design. The manufacturer's approved design must be current, complete, easily understood and compatible with the home being installed. The manufacturer's approved design must fully address the support, attachment, assembly and all other aspects of manufactured home construction and installation to assure that the manufactured home performs as a fully integrated structure and complies with all elements of the Manufactured Home Construction and Safety Standards. Elements of installation and foundation construction not addressed in the Manufactured Home Construction and Safety Standards must be in compliance with the UCC.(c) A design other than the manufacturer's approved design may not be utilized in the support, stabilization and assembly of a new manufactured home without authorization of the manufacturer and evaluation and approval by the manufacturer's DAPIA.(d) A building code official may not reject a manufacturer's approved design applicable to a particular home for any reason, including, but not limited to, the fact that the material was not reviewed, approved, sealed or certified by an engineer, architect or similar person licensed in this Commonwealth. If a building code official believes a manufacturer's approved design was approved by a DAPIA in error, or questions the validity of a manufacturer's approved design, the building code official may contact the Department, which will investigate the matter.The provisions of this § 149.3 amended January 24, 2014, effective 3/26/2014, 44 Pa.B. 488.The provisions of this § 149.3 amended under section 5 of the Manufactured Housing Improvement Act (35 P. S. § 1658.5).
This section cited in 12 Pa. Code § 149.3a (relating to installation and construction standards for relocated manufactured homes); and 12 Pa. Code § 149.6 (relating to Certificate of Compliance).