Or. Admin. Code § 741-310-0020

Current through Register Vol. 63, No. 10, October 1, 2024

Section 741-310-0020 - Side Clearance for Curved Track

(1) Minimum side clearance for objects adjacent to curved track constructed on or after May 3, 1983, covered by OAR 741-310-0010 through 741-310-0050, shall be increased at the rate of 1/2 inch per degree of curvature above that prescribed for tangent track.

(2) The Department recommends that minimum side clearance for curved tracks, covered by OAR 741-310-0010 through 741-310-0050, be at least 12 inches greater than that prescribed for tangent track.

(3) See Figure 305-1 and Figure 310-1 for diagrams of the minimum side clearances.

Or. Admin. Code § 741-310-0020

PUC 13-1981, f. & ef. 12-21-81 (Order No. 81-900); PUC 4-1983, f. & ef. 5-3-83 (Order No. 83-242); PUC 6-1983, f. & ef. 6-13-83 (Order No. 83-313); PUC 4-1990, f. & cert. ef. 4-17-90 (Order No. 90-488); RS 2-1996, f. & cert. ef. 3-14-96; Renumbered from 860-044-0106; RS 2-1998, f. & cert. ef. 8-20-98; RD 1-2006, f. & cert. ef. 8-28-06

Figures referenced are available from the agency.

Stat. Auth.: ORS 184.616, 184.619, 823.011 & 824.052

Stats. Implemented: ORS 824.050 & 824.052