Or. Admin. Code § 735-102-0030

Current through Register Vol. 63, No. 12, December 1, 2024

Section 735-102-0030 - Bicycle, Skateboard, Scooter and In-Line Skate Protective Headgear (Helmets)

(1) The Transportation Safety Office of the Oregon Department of Transportation adopts the mandatory national safety standard for bicycle helmets of the Consumer Product Safety Commission 16 CFR Part 1203, and the voluntary standards and specifications of the Snell Memorial Foundation (SNELL) B-90 and B-95, and the American Society for Testing and Materials (ASTM) F-1447-02, F-1492-00 and F-1898-01 for minimum performance criteria and test procedures for protective headgear for bicyclists, skateboarders, scooter riders and in-line skaters.

(2) The purpose of these standards is to reduce deaths and injuries by providing minimum acceptable levels of head protection.

(3) Protective headgear for bicyclists must be clearly labeled as required by federal law certifying compliance with U.S. CPSC standards. Additional certifications may be included as appropriate for specific headgear use.

Or. Admin. Code § 735-102-0030

DMV 8-1994, f. & cert. ef. 8-19-94; DMV 13-1994, f. & cert. ef. 10-20-94; DMV 12-2006, f. & cert. ef. 9-22-06; DMV 41-2021, minor correction filed 12/08/2021, effective 12/8/2021

Publications: Publications referenced are available from the agency.

Statutory/Other Authority: ORS 184.619, 184.619 & 815.052

Statutes/Other Implemented: ORS 815.052