Or. Admin. R. 734-082-0050

Current through Register Vol. 63, No. 9, September 1, 2024

Section 734-082-0050 - Load Length

(1) Variance permits are required for non-divisible loads that exceed legal length specified in ORS Chapter 818.

(2) Overlength permits will not be valid if overlength is caused by multiple items placed end to end, or overlapping unless specifically stated on the permit as authorized by statute or rule.

(3) Items joined (by spot weld, tack weld, bolting, strapping, etc.) to facilitate transport, shall be considered to be divisible loads and not eligible for overlength permits.

(4) Continuous trip permits for truck-tractor with semitrailer combinations may be issued for load length not in excess of 70 feet and overall length not in excess of 80 feet.

Or. Admin. R. 734-082-0050

TO 3-2000, f. & cert. ef. 2-11-00

Stat. Auth.: ORS 184.616, 184.619 & 818.200

Stats. Implemented: ORS 818.210, 818.220 & 818.225