Or. Admin. Code § 690-014-0100

Current through Register Vol. 63, No. 12, December 1, 2024

Section 690-014-0100 - Minimum Requirements for Claims of Beneficial Use for Permits and Transfer Final Orders

(1) The CWRE shall prepare a report, using a form or format provided by the Department, which describes the status of conditions and limitations in permits and transfer final orders such as:

(a) Type of use;

(b) Period of use;

(c) Place of use;

(d) Extent of use;

(e) Location of point of diversion or point of appropriation;

(f) Source of water;

(g) Rate;

(h) Installation of measuring device;

(i) Water use reporting;

(j) Water level reporting;

(k) Fish screening;

(l) The date of the inspection; and

(m) All other conditions or limitations.

(2) The CWRE shall provide the Department with sufficient information for the Director to determine the extent of beneficial use developed within the conditions or limits of the permit or transfer final order, including any specified development time limits.

(3) Uses partially developed by the water user shall be described. Uses or areas which were not developed shall be noted. Uses determined to exist which are not authorized by the permit or transfer final order being examined shall also be noted in the report but not included as part of the Claim of Beneficial Use. All uses shown on the map must be described in the report.

(4) The diversion works shall be accurately described by the map and report. A general narrative description of the distribution works shall be given. This description must trace the water system from the point(s) of diversion or appropriation to, and include the place of use. The description shall also include the return to public waters when required by the permit or transfer final order, such as fish propagation, mining and power facilities. The make, capacity, serial number and description of all pumps and measuring devices shall, if available, be described in the report. If the make, capacity, serial number and description of any pumps and measuring devices are not available, the report must specify why.

(5) Other water right permits, certificates, transfer final orders, or other conveyance systems connected to the system being examined shall be described in the report. Any reservoir, diversion dam, headgate, well, canal, flume, pump, and other related structures shall be described.

(6) The crops raised or other beneficial use made of the water shall be identified.

(7) The diversion rate shall be determined for each use and source when more than one use or source is involved.

(8) The maximum rate of use shall be determined by actual measurement when possible. Water measurements may be made by weir, meter, rated flume, reservoir capacity table or other method of measurement acceptable to the Department. The report shall describe the method used in making the measurement, the date made and a description of the location where the measurement was taken. It shall contain sufficient information, including current meter notes, rating tables, and/or calibration information to enable the Director to check the quantity of water measured in each case.

(9) Computations for the maximum capacity of the system shall be submitted for all claims. These computations may suffice to determine the maximum rate of application if the system was not operating when the inspection was conducted.

(10) The amount of water shall be limited by the Department to the lesser of: the authorized amount, the capacity of the delivery system, or the amount of actual beneficial use. The Claim of Beneficial Use shall include sufficient information to make the determination.

(11) Claims of Beneficial Use for reservoir permits, for storage of less than 9.2 acre-feet of water or with a dam less than 10 feet in height, that do not require approved as-built plans and specifications be on file with the Department, shall also include the following:

(a) A drawing showing the cross section of the dam at maximum section showing complete details and dimensions. The drawing should be drawn at a standard scale. Normally this measurement is taken from the deepest part of the channel to the top of the embankment. Vertical accuracy is required to 0.25 feet for the purpose of this measurement;

(b) A description of the outlet works; and

(c) A description of the emergency spillway.

(12) The rate of flow shall be determined to three significant figures with reporting necessary only to thousandths. Examples are: 4,560 cfs; 456 cfs; 45.6 cfs; 4.56 cfs; 0.456 cfs; 0.046 cfs; and 0.005 cfs.

(13) When computing the storage capacity of reservoirs, the volume of water shall be determined to three significant figures with reporting, for the purpose of the Claim of Beneficial Use, necessary only to tenths. Examples are: 4,560 af; 456 af; 45.6 af; 4.6 af; and 0.5 af.

(14) The following statement, signed by the CWRE, shall appear at the end of the Claim of Beneficial Use: "The facts contained in this Claim of Beneficial Use are true and correct to the best of my knowledge."

(15) The following statement, signed or acknowledged by the permittee or transferee, shall appear at the end of the Claim of Beneficial Use: "The facts contained in this Claim of Beneficial Use are true and correct to the best of my knowledge. I request that the Department issue a water right certificate."

(16) A CWRE may make a written request to the Director for a waiver of one or more of the Claim of Beneficial Use standards. Waivers cannot be requested for elements relating to conditions or other limitations of the permit or transfer final order. The Director will determine whether the waiver shall be allowed and will respond to such requests in writing.

Or. Admin. Code § 690-014-0100

WRD 9-1987(Temp), f. & ef. 9-1-87; WRD 3-1988, f. 2-26-88, cert. ef. 2-28-88; WRD 3-2004, f. 6-15-04, cert. ef. 7-1-04

Stat. Auth.: ORS 536 & 537

Stats. Implemented: ORS 536 & 537