Or. Admin. Code § 660-008-0015

Current through Register Vol. 63, No. 10, October 1, 2024

Section 660-008-0015 - Clear and Objective Approval Standards Required

(1) Except as provided in section (2) of this rule, a local government may adopt and apply only clear and objective standards, conditions and procedures regulating the development of needed housing on buildable land. The standards, conditions and procedures may not have the effect, either in themselves or cumulatively, of discouraging needed housing through unreasonable cost or delay.

(2) In addition to an approval process for needed housing based on clear and objective standards, conditions and procedures as provided in section (1) of this rule, a local government may adopt and apply an optional alternative approval process for applications and permits for residential development based on approval criteria regulating, in whole or in part, appearance or aesthetics that are not clear and objective if:

(a) The applicant retains the option of proceeding under the approval process that meets the requirements of section (1);

(b) The approval criteria for the alternative approval process comply with applicable statewide land use planning goals and rules; and

(c) The approval criteria for the alternative approval process authorize a density at or above the density level authorized in the zone under the approval process provided in section (1) of this rule.

(3) Subject to section (1), this rule does not infringe on a local government's prerogative to:

(a) Set approval standards under which a particular housing type is permitted outright;

(b) Impose special conditions upon approval of a specific development proposal; or

(c) Establish approval procedures.

Or. Admin. Code § 660-008-0015

LCDC 3-1982, f. & ef. 7-21-82; LCDD 2-2012, f. & cert. ef. 2-14-12

Stat. Auth.: ORS 197.040

Stats. Implemented: ORS 197.295 - 197.314 & 197.475 - 197.490