Or. Admin. Code § 635-041-0053

Current through Register Vol. 63, No. 10, October 1, 2024

Section 635-041-0053 - Measurement of Net Mesh Size

The mesh size of any gill net or setnet is determined only after the meshes are wet from soaking in water not less than one hour. Three consecutive meshes are then placed under ten pounds of vertical tension and the measurement is taken from the inside of one vertical knot to the outside of the opposite vertical knot of the center mesh.

Or. Admin. Code § 635-041-0053

FWC 23-1978, f. & ef. 5-4-78; FWC 2-1979, f. & ef. 1-25-79, Renumbered from 635-035-0053; FWC 6-1980, f. & ef. 1-28-80; FWC 1-1981, f. & ef. 1-19-81; FWC 13-1981, f. & ef. 4-3-81; FWC 6-1982, f. & ef. 1-28-82; FWC 4-1984, f. & ef. 1-31-84; FWC 79-1986(Temp), f. & ef. 12-22-86; FWC 2-1987, f. & ef. 1-23-87

Stat. Auth.: ORS 506 & 507

Stats. Implemented: ORS 506 & 507