Or. Admin. R. 437-004-1050

Current through Register Vol. 63, No. 6, June 1, 2024

Section 437-004-1050 - Head Protection

NOTE: See Division 4/W, 437-004-600, 170.240(c)(10) for information about the chemical-resistant headwear requirements for pesticide handlers.

(1) General requirements. Require employees to wear head protection helmets or hardhats when working in areas where there is a potential for injury to the head such as from falling or flying objects or electrical hazards.

(2) Criteria for protective headwear.

(a) Head protection must comply with any of the following consensus standards:

(A) ANSI Z89.1-2003, "American National Standard for Industrial Head Protection;"

(B) ANSI Z89.1-1997, "American National Standard for Industrial Head Protection;" or

(C) ANSI Z89.1-1986, "American National Standard for Personnel Protection - Protective Headwear for Industrial Workers - Requirements."

NOTE: The Oregon OSHA Resource Center has copies of these standards for public review at 350 Winter Street NE, Salem OR.

(b) Protective headwear that the employer demonstrates is at least as effecive as protective headwear that is constructed in accordance with one of the above consensus standards will be deemed to be in compliance with the requirements of this section.

(3) Require employees who work close to moving parts of power-driven machinery or sources of ignition and whose hair is long enough to be caught in it or to be ignited, to wear caps or other head coverings that completely restrains the hair.

NOTE: See Divisions 4/O and 4/P for equipment and tool guarding requirements.

Or. Admin. R. 437-004-1050

OSHA 4-1998, f. 8-28-98, cert. ef. 10-1-98; OSHA 2-2010, f. & cert. ef. 2-25-10; OSHA 4-2012, f. 9-19-12, cert. ef. 1-1-13

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 654.025(2) & 656.726(4)

Stats. Implemented: ORS 654.001 - 654.295