Or. Admin. Code § 437-002-0280

Current through Register Vol. 63, No. 10, October 1, 2024

Section 437-002-0280 - Adoption by Reference

In addition to, and not in lieu of, any other safety and health codes contained in OAR Chapter 437, the Department adopts by reference the following federal regulations printed as part of the Code of Federal Regulations, 29 CFR 1910, in the Federal Register:

(1)29 CFR 1910.251 Definitions. Repealed. Oregon OSHA Admin. Order 6-2014, f. 10/28/14, ef. 5/1/15. In Oregon, OAR 437-002-0299 applies.

(2)29 CFR 1910.252 General Requirements, published 3/26/12, FR vol. 77, no. 58, p. 17574. Amended with Oregon OSHA Administrative Order 11-2021.

(3)29 CFR 1910.253 Oxygen-Fuel Gas Welding and Cutting. Repealed. Oregon OSHA Admin. Order 6-2014, f. 10/28/14, ef. 5/1/15. In Oregon, OAR 437-002-2253 applies.

(4)29 CFR 1910.254 Arc Welding and Cutting, published 9/13/05, FR vol. 70, no. 176, p. 53925.

(5)29 CFR 1910.255 Resistance Welding, published 4/11/90, Federal Register, vol. 55, no. 70, pp. 13710-13711.

These rules are on file with the Oregon Occupational Safety and Health Division, Department of Consumer and Business Services, and the United States Government Printing Office.

Or. Admin. Code § 437-002-0280

OSHA 232-1990, f. 9-28-90, cert. ef. 12-1-90; OSHA 4-1997, f. & cert. ef. 4-2-97; OSHA 3-1998, f. & cert. ef. 7-7-98; OSHA 4-2005, f. & cert. ef 12-14-05; OSHA 7-2008, f. & cert. ef. 5-30-08; OSHA 2-2010, f. & cert. ef. 2-25-10; OSHA 1-2012, f. & cert .ef. 4-10-12; OSHA 5-2012, f. & cert. ef. 9-25-12; OSHA 6-2014, f. 10-28-14, cert. ef. 5-1-15; OSHA 11-2021, amend filed 09/01/2021, effective 9/1/2022

Statutory/Other Authority: ORS 654.025(2), 654.035, 656.726(4)

Statutes/Other Implemented: ORS 654.001 through 654.295