Or. Admin. Code § 437-002-0032

Current through Register Vol. 63, No. 12, December 1, 2024

Section 437-002-0032 - Ramps and Runways

(1) Scope and application. This rule applies to the safe use of ramps and runways for vehicles in addition to the rules in Division 2/D.

(2) The employer must ensure ramps and runways for vehicles:

(a) Have adequate width and evenness for safe operation of equipment.

(b) Are provided with timber guards of not less than nominal 6-inch by 6-inch material set on nominal 3-inch blocks, or the equivalent, placed parallel to and secured to the sides of the ramp or runway.

Or. Admin. Code § 437-002-0032

OSHA 4-1990, f. & cert. ef. 1-23-90; OSHA 2-2017, f. 5-16-17, cert. ef. 11/1/2017

Stat. Auth.: ORS 654.025(2) & 656.726(3)

Stats. Implemented: ORS 654.001 - 654.295