Or. Admin. Code § 340-240-0610
Current through Register Vol. 63, No. 12, December 1, 2024
Section 340-240-0610 - Klamath Falls Nonattainment Area Contingency Measures: Continuous Monitoring for Industrial Sources(1) The owner or operator of an Oregon Title V Operating Permit program source, as defined in OAR 340-200-0020, must install and operate instrumentation for measuring and recording emissions or the parameters that affect the emission of particulate matter from wood-fired boilers by June 1, 2015, to ensure that the sources and the air pollution control devices are operated at all times at their full efficiency and effectiveness so that the emission of particulate matter is kept at the lowest practicable level. Continuous monitoring equipment and operation must be in accordance with the DEQ Continuous Monitoring Manual.[NOTE: The DEQ Continuous Monitoring Manual is published with OAR 340-200-0035.](2) At a minimum, the monitoring required under paragraph (1) must include: (a) Continuous monitoring of control device parameters for any wood-fired boiler.(b) Continuous monitoring of opacity for any wood- fired boiler not controlled by a wet scrubber. [NOTE: This rule is included in the State of Oregon Clean Air Act Implementation Plan that EQC adopted under OAR 340-200-0040.]
Or. Admin. Code § 340-240-0610
DEQ 10-2012, f. & cert. ef. 12-11-12; DEQ 7-2015, f. & cert. ef. 4/16/2015; DEQ 13-2019, amend filed 05/16/2019, effective 5/16/2019Publications: Publications referenced are available from the agency.
Statutory/Other Authority: ORS 468.020, 468A.025 & 468A.070
Statutes/Other Implemented: ORS 468A.025 & 468A.070