Or. Admin. Code § 250-010-0225

Current through Register Vol. 64, No. 1, January 1, 2025

Section 250-010-0225 - Waterway Marker Placement Conditions

(1) After obtaining the requested waterway marker permit, the applicant must install, inspect, maintain, and remove the permitted marker at their own expense and as directed by the Marine Board.

(2) All markers must comply with the characteristics and standards of OAR 250-010-0240 to 250-010-0275 and all permits issued pursuant to this chapter are subject to the following conditions

(a) Placement of these markers must be as requested in the application. Any deviation will require the applicant to apply to have the permit amended.

(b) The applicant must attach a Marine Board supplied coding device or permanently attach the permit number on the top of the marker.

(c) All markers must be maintained in proper condition at all times. A discrepancy exists whenever a marker is not as described in the approved application or is destroyed, damaged, moved, or is otherwise unserviceable.

(d) Authorization by the Marine Board for the placement of a marker does not authorize any invasion of private rights, nor grant any exclusive privileges, nor does it preclude the necessity of complying with any other federal, state or local laws or regulations.

Or. Admin. Code § 250-010-0225

OSMB 3-2015, f. 4-30-15, cert. ef. 5/1/2015

Stat. Auth.: ORS 830.110

Stats. Implemented: 830.110