Or. Admin. Code § 141-014-0300

Current through Register Vol. 63, No. 12, December 1, 2024

Section 141-014-0300 - Measurement Determination

(1) The Department may at its discretion allow an applicant, lessee or licensee who is unable to measure and report the amount of material removed or used in cubic yards to measure and report the quantity in short tons. However, the Department:

(a) Will only allow an applicant, lessee or licensee to report removal and use of material in short tons if they develop, at their own expense, a short ton-to-cubic yard conversion factor based on tests of the material;

(b) Reserves the right to accept or reject the short ton-to-cubic yard conversion factor; and

(c) May at any time during the term of the lease or license require the lessee or licensee to re-establish, at their own expense, the validity of the conversion factor.

(2) If it is determined by the lessee, licensee or the Department that the short ton-to-cubic yard conversion factor in use is not valid, modification of the compensation owed will be prospective only.

(3) Any changes made to the short ton-to-cubic yard conversion factor used in a lease or license will be made by written addendum to that lease or license.

Or. Admin. Code § 141-014-0300

DSL 2-2008, f. & cert. ef. 10-15-08

Stat. Auth.: ORS 273.551, 274.525, 274.530, 274.550 & 274.560

Stats. Implemented: ORS 274 .525 & 274 .550