Or. Admin. R. 137-049-0670

Current through Register Vol. 63, No. 6, June 1, 2024

Section 137-049-0670 - Design-Build Contracts

(1) General. The Design-Build form of contracting, as defined at OAR 137-049-0610(3), has technical complexities that are not readily apparent. Contracting Agencies shall use this contracting method only with the assistance of knowledgeable staff or consultants who are experienced in its use. In order to use the Design-Build process, the Contracting Agency must be able to reasonably anticipate the following types of benefits:

(a) Obtaining, through a Design-Build team, engineering design, plan preparation, value engineering, construction engineering, construction, quality control and required documentation as a fully integrated function with a single point of responsibility;

(b) Integrating value engineering suggestions into the design phase, as the construction Contractor joins the project team early with design responsibilities under a team approach, with the potential of reducing Contract changes;

(c) Reducing the risk of design flaws, misunderstandings and conflicts inherent in construction Contractors building from designs in which they have had no opportunity for input, with the potential of reducing Contract claims;

(d) Shortening project time as construction activity (early submittals, mobilization, subcontracting and advance Work) commences prior to completion of a "Biddable" design, or where a design solution is still required (as in complex or phased projects); or

(e) Obtaining innovative design solutions through the collaboration of the Contractor and design team, which would not otherwise be possible if the Contractor had not yet been selected.

(2) Authority. Contracting Agencies shall utilize the Design-Build form of contracting only in accordance with the requirements of these OARs 137-049-0600 to 137-049-0690 rules. See particularly 137-049-0620 on "Use of Alternative Contracting Methods" and 137-049-0680 pertaining to ESPCs.

(3) Selection. Design-Build selection criteria may include those factors set forth above in OAR 137-049-0640(2)(a), (b) and (c).

(4) QBS Inapplicable. Because the value of construction Work predominates the Design-Build form of contracting, the qualifications based selection (QBS) process mandated by ORS 279C.110 for State Contracting Agencies in obtaining certain consultant Personal Services is not applicable.

(5) Licensing. If a Design-Build Contractor is not an Oregon licensed design professional, the Contracting Agency shall require that the Design-Build Contractor disclose in its Written Offer that it is not an Oregon licensed design professional, and identify the Oregon licensed design professional(s) who will provide design services. See ORS 671.030(2)(g) regarding the offer of architectural services, and 672.060(11) regarding the offer of engineering services that are appurtenant to construction Work.

(6) Performance Security. ORS 279C.380(1)(a) provides that for Design-Build Contracts the surety's obligation on performance bonds, or the Bidder's obligation on cashier's or certified checks accepted in lieu thereof, includes the preparation and completion of design and related Personal Services specified in the Contract. This additional obligation, beyond performance of construction Work, extends only to the provision of Personal Services and related design revisions, corrective Work and associated costs prior to final completion of the Contract (or for such longer time as may be defined in the Contract). The obligation is not intended to be a substitute for professional liability insurance, and does not include errors and omissions or latent defects coverage.

(7) Contract Requirements. Contracting Agencies shall conform their Design-Build contracting practices to the following requirements:

(a) Design Services. The level or type of design services required must be clearly defined within the Procurement documents and Contract, along with a description of the level or type of design services previously performed for the project. The Personal Services and Work to be performed shall be clearly delineated as either design Specifications or performance standards, and performance measurements must be identified.

(b) Professional Liability. The Contract shall clearly identify the liability of design professionals with respect to the Design-Build Contractor and the Contracting Agency, as well as requirements for professional liability insurance.

(c) Risk Allocation. The Contract shall clearly identify the extent to which the Contracting Agency requires an express indemnification from the Design-Build Contractor for any failure to perform, including professional errors and omissions, design warranties, construction operations and faulty Work claims.

(d) Warranties. The Contract shall clearly identify any express warranties made to the Contracting Agency regarding characteristics or capabilities of the completed project (regardless of whether errors occur as the result of improper design, construction, or both), including any warranty that a design will be produced that meets the stated project performance and budget guidelines.

(e) Incentives. The Contract shall clearly identify any economic incentives and disincentives, the specific criteria that apply and their relationship to other financial elements of the Contract.

(f) Honoraria. If allowed by the RFP, honoraria or stipends may be provided for early design submittals from qualified finalists during the solicitation process on the basis that the Contracting Agency is benefited from such deliverables.

Or. Admin. R. 137-049-0670

DOJ 11-2004, f. 9-1-04, cert. ef. 3-1-05; DOJ 20-2005, f. 12-27-05, cert. ef. 1-1-06; DOJ 15-2009, f. 12-1-09, cert. ef. 1-1-10

Stat. Auth.: ORS 279C.335 & 279A.065

Stats. Implemented: ORS 279C.335, 279A.065, 279C.110 & 351.086