Okla. Admin. Code § 40:50-1-3.1

Current through Vol. 42, No. 4, November 1, 2024

Section 40:50-1-3.1 - Violation reset

(a) A violation reset shall be activated by any of the following:

(1) Three (3) positive result startup tests within a fifteen (15) minute time frame.

(2) A circumvention.

(3) A retest violation.

(4) A power violation, once power is restored to the device.

(b) When a violation reset is activated, the device will initiate a unique audible and/or visual cue that will warn the driver that the device will enter a permanent lockout in five (5) days. This event will be uniquely recorded in the data storage system and will simultaneously start a countdown that culminates in the permanent lockout. A licensed ignition interlock technician shall remedy a permanent lockout in personunless the manufacturer has been approved for temporary lockout override issuance pursuant to O.A.C 40:50-1-3.3.

(c) Anytime a device is submitted pursuant to a violation reset the licensed ignition interlock technician shall perform a violation reset service consisting of, but not limited to:

(1) Performing maintenance and calibration in accordance with this title, and

(2) Retrieving all data contained in the data storage system. Proper record maintenance shall be ensured as required in this title.

Okla. Admin. Code § 40:50-1-3.1

Added at 27 Ok Reg 2667, eff 8-26-10

Amended by Oklahoma Register, Volume 32, Issue 24, September 1, 2015, eff. 9/11/2015

Amended by Oklahoma Register, Volume 36, Issue 24, September 3, 2019, eff. 9/14/2019

Amended by Oklahoma Register, Volume 37, Issue 24, September 1, 2020, eff. 9/11/2020

Amended by Oklahoma Register, Volume 40, Issue 22, August 1, 2023, eff. 8/11/2023