Okla. Admin. Code § 40:50-1-2.4

Current through Vol. 42, No. 4, November 1, 2024

Section 40:50-1-2.4 - Modification of a certified device

(a) A manufacturer representative shall notify the Board at least 15 days before implementation of any modification, upgrade or alteration to any hardware, software or firmware of a device certified for use in this state. Said notification shall include:

(1) A description and explanation of the modification, upgrade or alteration and satisfactory proof that these modifications, upgrades or alterations do not adversely affect the ability of the device to satisfy the requirements of this title, and

(2) A comprehensive plan of action for the phasing out of the use of the current device. This plan of action must be approved by the Board prior to the implementation of the plan of action.

(b) Any equipment in the possession of the Board that was retained pursuant to certification of the device shall be modified, upgraded or altered simultaneously with implementation.

(c) Material modifications to a certified device, as determined by the Board, may require certification pursuant to this title.

Okla. Admin. Code § 40:50-1-2.4

Added at 27 Ok Reg 2667, eff 8-26-10

Amended by Oklahoma Register, Volume 36, Issue 24, September 3, 2019, eff. 9/14/2019