Okla. Admin. Code § 40:50-1-3.2

Current through Vol. 42, No. 4, November 1, 2024

Section 40:50-1-3.2 - Reporting requirements

(a) Reportable violations are as follows:

(1) Three (3) positive result startup tests within a fifteen (15) minute time frame.

(2) A circumvention.

(3) A retest violation.

(4) Tampering.

(5) Permanent lockout.

(b) If required by the Installation Authority and/or Monitor, reportable violations shall be reported in the form and/or format designated by the Installation Authority and/or Monitor, within five business days, banking holidays excepted, after a maintenance and calibration service, violation reset service or removal of the device.

(c) The manufacturer shall ensure proper record maintenance.

(d) The manufacturer shall report to the Board, in the form and format designated by the Board:

(1) Device installations.

(2) Device removals.

(3) Any violation reset.

Maintenance and calibration performed on an ignition interlock device as required by these rules.

Okla. Admin. Code § 40:50-1-3.2

Added at 27 Ok Reg 2667, eff 8-26-10

Amended by Oklahoma Register, Volume 32, Issue 24, September 1, 2015, eff. 9/11/2015

Amended by Oklahoma Register, Volume 33, Issue 24, September 1, 2016, eff. 9/11/2016

Amended by Oklahoma Register, Volume 35, Issue 24, September 4, 2018, eff. 9/14/2018

Amended by Oklahoma Register, Volume 36, Issue 24, September 3, 2019, eff. 9/14/2019

Amended by Oklahoma Register, Volume 37, Issue 24, September 1, 2020, eff. 9/11/2020

Amended by Oklahoma Register, Volume 40, Issue 22, August 1, 2023, eff. 8/11/2023