Okla. Admin. Code § 380:70-3-7

Current through Vol. 42, No. 4, November 1, 2024

Section 380:70-3-7 - Assignment and application of state identification numbers

(a) Upon completion of the installation of an elevator or conveyance, or at the time of the initial certificate inspection of an existing installation, each elevator or conveyance shall be identified by a unique six digit state identification number. The six digit state identification numbers shall begin with the capital letter "E" and shall be followed by a five digit numeric identification number.

(b) The state identification number shall appear on all Certificates of Operation issued pursuant to the provisions of this Act.

(c) State identification numbers, once issued shall not be reissued.

(d) State identification numbers shall be permanently affixed to, stamped or etched onto the elevator or conveyance by the installing contractor for new installations and by the owner/user or their designated agent for existing installations.

Okla. Admin. Code § 380:70-3-7

Added at 24 Ok Reg 29, eff 11-1-06 (emergency); Added at 24 Ok Reg 2231, eff 6-25-07