Okla. Admin. Code § 380:70-3-4

Current through Vol. 42, No. 4, November 1, 2024

Section 380:70-3-4 - National standards, adoption and availability

(a) The following American National Standards are hereby adopted:

(1) Safety Code for Elevators and Escalators, ASME A17.1, latest edition and most current addenda.

(2) Safety Code for Existing Elevators and Escalators, ASME A17.3, latest edition and most current addenda.

(3) Safety Standard for Platform Lifts and Stairway Chairlifts, ASME A18.1, latest edition and most current addenda.

(4) Safety Standard for Belt Manlifts, ASME A90.1, latest edition and most current addenda.

(5) Safety Requirements for Personnel Hoists and Employee Elevators, ASSE A10.4, latest edition.

(6) The National Electrical Code, NFPA 70, latest edition.

(7) The International Building Code, latest edition.

(8) American National Standard for Transport Platforms, ANSI/SIA A92.10-2009.

(b) Standards referenced in this chapter are available for public viewing in the office of the Chief Elevator Inspector and may be purchased from the American Society of Mechanical Engineers, the National Fire Protection Association, the American Society of Safety Engineers, and the International Code Council.

(c) Compliance with the provisions of the Elevator Safety Act does not relieve an owner, operator, or licensed Elevator Contractor from the requirement to comply with Codes and Standards as may be adopted and enforced by the Construction Industries Board and the Office of the State Fire Marshal, or other such state or jurisdictional agency as may be required.

(d) Where there is a conflict between the adopted standard and this Chapter, the requirements of this Chapter shall take precedence.

Okla. Admin. Code § 380:70-3-4

Added at 24 Ok Reg 29, eff 11-1-06 (emergency); Added at 24 Ok Reg 2231, eff 6-25-07; Amended at 26 Ok Reg 2262, eff 7-1-09

Amended by Oklahoma Register, Volume 37, Issue 24, September 1, 2020, eff. 9/15/2020