Okla. Admin. Code § 380:25-3-27

Current through Vol. 42, No. 6, December 2, 2024

Section 380:25-3-27 - Application of state serial numbers

(a) Upon completion of the installation of a boiler or pressure vessel or at the time of the initial certificate inspection of an existing installation, each boiler or pressure vessel shall be stamped, or otherwise marked or identified, by the Chief Boiler Inspector or Deputy Inspector with a serial number of the state consisting of letters and figures to be not less than 1/4 inch in height and arranged as follows: OK00000

(b) Hot water supply heaters shall be identified by a pre-numbered label provided by the Department of Labor.

Amended at 16 Ok Reg 3017, eff 7-12-99; Amended at 18 Ok Reg 3509, eff 9-14-01