Browse as ListSearch Within- Section 310:257-9-1 - Approved System
- Section 310:257-9-2 - System flushing and disinfection
- Section 310:257-9-3 - [Revoked]
- Section 310:257-9-4 - [Revoked]
- Section 310:257-9-5 - Nondrinking water
- Section 310:257-9-6 - Sampling
- Section 310:257-9-7 - Sample report
- Section 310:257-9-8 - Quantity and availability, capacity
- Section 310:257-9-9 - Pressure
- Section 310:257-9-10 - Distribution, delivery, and retention, system
- Section 310:257-9-11 - Alternative water supply
- Section 310:257-9-12 - Materials, approved
- Section 310:257-9-13 - Approved system and cleanable fixtures
- Section 310:257-9-14 - Handwashing facility, installation
- Section 310:257-9-15 - Backflow prevention, air gap
- Section 310:257-9-16 - Backflow prevention device, design standard
- Section 310:257-9-17 - Conditioning device, design
- Section 310:257-9-18 - Numbers and capacities, handwashing facilities
- Section 310:257-9-19 - Toilets and urinals
- Section 310:257-9-20 - Service sink
- Section 310:257-9-21 - Backflow prevention device, when required
- Section 310:257-9-22 - Backflow prevention device, carbonator
- Section 310:257-9-23 - Location and placement, handwashing facilities
- Section 310:257-9-24 - Backflow prevention device, location
- Section 310:257-9-25 - Conditioning device, location
- Section 310:257-9-26 - Using a handwashing facility.
- Section 310:257-9-27 - Prohibiting a cross connection
- Section 310:257-9-28 - Scheduling inspection and service for a water system device
- Section 310:257-9-29 - Water reservoir of fogging devices, cleaning
- Section 310:257-9-30 - System maintained in good repair
- Section 310:257-9-31 - Materials, approved
- Section 310:257-9-32 - Enclosed system, sloped to drain
- Section 310:257-9-33 - Inspection and cleaning port, protected and secured
- Section 310:257-9-34 - "V" type threads, use limitation
- Section 310:257-9-35 - Tank vent, protected
- Section 310:257-9-36 - Inlet and outlet, sloped to drain
- Section 310:257-9-37 - Hose, construction and identification
- Section 310:257-9-38 - Filter, compressed air
- Section 310:257-9-39 - Protective cover or device
- Section 310:257-9-40 - Mobile food establishment tank inlet
- Section 310:257-9-41 - System flushing and sanitization
- Section 310:257-9-42 - Using a pump and hoses, backflow prevention
- Section 310:257-9-43 - Protecting inlet, outlet, and hose fitting
- Section 310:257-9-44 - Tank, pump, and hoses, dedication
- Section 310:257-9-45 - Capacity and drainage
- Section 310:257-9-46 - Establishment drainage system
- Section 310:257-9-47 - Backflow prevention
- Section 310:257-9-48 - Grease trap
- Section 310:257-9-49 - Conveying sewage
- Section 310:257-9-50 - Removing mobile food establishment wastes
- Section 310:257-9-51 - Flushing a waste retention tank
- Section 310:257-9-52 - Approved sewage disposal system
- Section 310:257-9-53 - Other liquid wastes and rainwater
- Section 310:257-9-54 - Indoor storage area
- Section 310:257-9-55 - Outdoor storage surface
- Section 310:257-9-56 - Outdoor enclosure
- Section 310:257-9-57 - Receptacles
- Section 310:257-9-58 - Receptacles in vending machines
- Section 310:257-9-59 - Outside receptacles
- Section 310:257-9-60 - Storage areas, rooms, and receptacles, capacity and availability
- Section 310:257-9-61 - Toilet room receptacle, covered
- Section 310:257-9-62 - Cleaning implements and supplies
- Section 310:257-9-63 - Storage areas, redeeming machines, receptacles and waste handling units, location
- Section 310:257-9-64 - Storing refuse, recyclables, and returnables
- Section 310:257-9-65 - Areas, enclosures, and receptacles, good repair
- Section 310:257-9-66 - Outside storage prohibitions
- Section 310:257-9-67 - Covering receptacles
- Section 310:257-9-68 - Using drain plugs
- Section 310:257-9-69 - Maintaining refuse areas and enclosures
- Section 310:257-9-70 - Cleaning receptacles
- Section 310:257-9-71 - Frequency
- Section 310:257-9-72 - Receptacles or vehicles
- Section 310:257-9-73 - Community or individual facility