Okla. Admin. Code § 310:257-7-37

Current through Vol. 42, No. 7, December 16, 2024

Section 310:257-7-37 - Temperature measuring devices

(a) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit.

(b) Except as specified in (c) of this Section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display.

(c) Paragraph (b) of this Section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars.

(d) Temperature measuring devices shall be designed to be easily readable.

(e) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 1^oC or 2^oF in the intended range of use.

Okla. Admin. Code § 310:257-7-37

Added at 23 Ok Reg 2358, eff 6-25-06; Amended at 26 Ok Reg 1477, eff 6-11-09