Okla. Admin. Code § 252:652-1-6

Current through Vol. 42, No. 8, January 2, 2025

Section 252:652-1-6 - Fees

(a) Class I injection well facilities.

(1) Permit application - $2,000.

(2) Permit renewal - $500.

(b)Class III injection well facilities.

(1) Permit application - $2000

(2) Permit renewal - $500

(c)Class V injection well facilities. [See 40 CFR 146.5(e) ]

(1) Permit application

(A) Wells used for the injection of wastes into a subsurface formation - $2,000

(B) Others listed herein - $600

(i) Cooling water return flow wells used to inject water previously used for cooling, excluding air conditioning return flow wells used to return to the supply aquifer the water used for heating or cooling in a heat pump;

(ii) Sand backfill and other backfill wells used to inject a mixture of water and sand, mill tailings or other solids into mined out portions of subsurface mines;

(iii) Wells used for solution mining of conventional mines such as stopes leaching;

(iv) Injection wells used in experimental technologies; and

(v) Injection wells used for in situ recovery of lignite, coal, tar sands and oil shale.

(2) Permit renewal for facilities listed in (1)(A) and (1)(B) of this subsection - $100

Okla. Admin. Code § 252:652-1-6

Added at 13 Ok Reg 2099, eff 7-1-96

Amended by Oklahoma Register, Volume 33, Issue 24, September 1, 2016, eff. 9/15/2016