Okla. Admin. Code § 252:515-3-51

Current through Vol. 41, No. 19, June 17, 2024

Section 252:515-3-51 - General requirements

(a)Applicability. The maps and designs identified in this Part shall be submitted with permit applications for:

(1) all new solid waste disposal facilities;

(2) expansions of permit boundaries of existing solid waste disposal facilities;

(3) expansions of waste handling or disposal boundaries of existing solid waste disposal facilities; and

(4) any other modification to an existing permit where the data originally submitted would be made ambiguous, inaccurate, or out of date by the proposed modification.

(b)Additional maps for land disposal facilities. In addition to the maps and designs required by this Part, the maps identified in Part 7 of this Subchapter shall be submitted with permit applications for:

(1) new land disposal facilities;

(2) expansions of permit boundaries of existing land disposal facilities; and

(3) expansions of waste disposal boundaries of existing land disposal facilities.

(c)Illegible. The permit application will be considered administratively incomplete if any maps or drawings submitted are not legible.

(d)Map sequence. All maps and designs shall be submitted in the permit application in the sequence identified.

(e)Map scale. Unless otherwise identified, all maps submitted as part of a permit application shall be prepared at a scale of one inch equals one hundred feet (1" = 100'). An alternative scale may be used with approval of the DEQ.

(f)Map details.

(1) All maps shall show as a minimum, legend, title, north arrow, permit boundary, buffer zone, and boundaries of waste disposal or processing areas.

(2) If applicable, the locations of groundwater monitoring wells and gas monitoring probes shall be identified.

Okla. Admin. Code § 252:515-3-51

Added at 20 Ok Reg 1151, eff 6-1-03