Okla. Admin. Code § 252:410-13-72

Current through Vol. 41, No. 19, June 17, 2024

Section 252:410-13-72 - Cabinet x-ray system requirements

(a)Certification required. An owner/operator of a cabinet x-ray system must document that the system is certified in accordance with 21 CFR 1010.2 as being manufactured and assembled pursuant to 21 CFR 1020.40(a),(b) and (c)(1),(2) and (4) through (9).

(b)Modified systems. If a certified cabinet x-ray system is modified in any way, it shall be deemed to be an open-beam system and subject to the requirements of this Subchapter for open-beam systems unless it is recertified under 21 CFR 1010.2.

(c)Exemptions for certain certified systems. Owners/operators of certified cabinet x-ray systems that do not contain a port or aperture are exempt from the refresher training requirements of 252:410-3-32(c), the annual surveys required by 252:410-13-3(b)(1)(B) and the area posting required by 252:410-13-3(c). Owners/operators of cabinet systems with a maximum kVp of 10 or less and a maximum mA of 1 or less are exempt from 252:410-13-3(b).

Okla. Admin. Code § 252:410-13-72

Added at 17 Ok Reg 1136, eff 6-1-00