Okla. Admin. Code § 252:100-8-30

Current through Vol. 42, No. 1, September 16, 2024

Section 252:100-8-30 - Applicability

(a)General applicability.

(1) The requirements of this Part shall apply to the construction of any new major stationary source or any project that is a major modification at an existing major stationary source in an area designated as attainment or unclassifiable under sections 107(d)(1)(A)(ii) or (iii) of the Act.

(2) The requirements of OAC 252:100-8-34 through 252:100-8-36.2 apply to the construction of any new major stationary source or the major modification of any existing major stationary source, except as this Part otherwise provides.

(3) No new major stationary source or major modification to which the requirements of OAC 252:100-8-34 through 252:100-8-36.2(b) apply shall begin actual construction without a permit that states that the major stationary source or major modification will meet those requirements.

(4) The requirements of OAC 252:100-8, Parts 1, 3, and 5 also apply to the construction of all new major stationary sources and major modifications.

(b)Major modification.

(1)Major modification applicability determination.

(A) Except as otherwise provided in OAC 252:100-8-30(c), and consistent with the definition of "major modification", a project is a major modification for a regulated NSR pollutant if it causes two types of emissions increases:

(i) a significant emissions increase and

(ii) a significant net emissions increase.

(B) The project is not a major modification if it does not cause a significant emissions increase. If the project causes a significant emissions increase, then the project is a major modification only if it also results in a significant net emissions increase.

(2)Calculating significant emissions increase and significant net emissions increase before beginning actual construction. The procedure for calculating whether a significant emissions increase will occur depends upon the type of emissions units being modified, according to OAC 252:100-8-30(b)(3) through (5). This is the first step in determining if a proposed modification would be considered a major modification. The procedure for calculating whether a significant net emissions increase will occur at the major stationary source is contained in the definition of "net emissions increase". This is the second step in the process of determining if a proposed modification is a major modification. Both steps occur prior to the beginning of actual construction. Regardless of any such preconstruction projections, a major modification results if the project causes a significant emissions increase and a significant net emissions increase.

(3)Actual-to-projected-actual applicability test for projects that only involve existing emissions units. A significant emissions increase of a regulated NSR pollutant is projected to occur if the sum of the difference between the projected actual emissions and the baseline actual emissions for each existing emissions unit, equals or exceeds the amount that is significant for that pollutant.

(4)Actual-to-potential test for projects that only involve construction of a new emissions unit(s). A significant emissions increase of a regulated NSR pollutant is projected to occur if the sum of the difference between the potential to emit from each new emissions unit following completion of the project and the baseline actual emissions of these units before the project equals or exceeds the amount that is significant for that pollutant.

(5)Hybrid test for projects that involve multiple types of emissions units. A significant emissions increase of a regulated NSR pollutant is projected to occur if the sum of the emissions increases for each emissions unit, using the method specified in OAC 252:100-8-30(b)(3) or (4) as applicable with respect to each emissions unit, for each type of emissions unit equals or exceeds the amount that is significant for that pollutant.

(6)Actual-to-potential test for projects that only involve existing emissions units. In lieu of using the actual-to-projected-actual test, owners or operators may choose to use the actual-to-potential test to determine if a significant emissions increase of a regulated NSR pollutant will result from a proposed project. A significant emissions increase of a regulated NSR pollutant will occur if the sum of the difference between the potential emissions and the baseline actual emissions for each existing emissions unit, equals or exceeds the amount that is significant for that pollutant. Owners or operators who use the actual to potential test will not be subject to the recordkeeping requirements in OAC 252:100-8-36.2(c).

(c)Plantwide applicability limitation (PAL). Major stationary sources seeking to obtain or maintain a PAL shall comply with the requirements under OAC 252:100-8-38.

Okla. Admin. Code § 252:100-8-30

Amended and renumbered from 252:100-7-30 at 15 Ok Reg 2590, eff 6-25-98; Amended at 23 Ok Reg 1699, eff 6-15-06; Amended at 26 Ok Reg 1146, eff 7-1-09