Okla. Admin. Code § 230:25-21-3

Current through Vol. 42, No. 4, November 1, 2024

Section 230:25-21-3 - Review and testing of certification ballots

State Election Board personnel shall review and test the certification ballots submitted by the printer. The ballots shall be marked and processed through the voting device. The ballots also shall be processed through a high-speed scanner controlled by the voting device system software. The results then shall be tabulated in the voting device system software, and all necessary reports shall be printed and examined.

(1) If the ballots cannot be read by the voting device or by the high-speed scanner or if the tabulated results are not as expected, the printer shall be determined to have failed the first part of the certification process. A printer who fails the first part of the certification process may repeat the process one time. If the printer also fails the second time, the printer shall be disqualified from continuing the certification process.

(2) If the ballots are read by the voting device and by the high-speed scanner and if the tabulated results are as expected, the printer shall be determined to have passed the first part of the certification process. The printer then shall proceed to the second part of the certification process, and the State Election Board staff will conduct an on-site review to observe the digital ballot printing process.

Okla. Admin. Code § 230:25-21-3

Added at 30 Ok Reg 1648, eff 7-15-13

Amended by Oklahoma Register, Volume 36, Issue 24, September 3, 2019, eff. 9/16/2019