Okla. Admin. Code § 165:5-7-9

Current through Vol. 42, No. 7, December 16, 2024

Section 165:5-7-9 - Well location exception

(a) The application, which shall be limited to a single well, and notice of hearing for an order granting a well location exception for a well drilled or to be drilled for oil or gas into any common source of supply at a location other than that authorized by a rule or order of the Commission shall be served by the applicant no less than fifteen (15) days prior to the date of the hearing, by regular mail, upon the operator of each well located in an adjoining or cornering tract of land or drilling and spacing unit, currently producing from the same common source of supply, toward which tract or unit the well location has been or is proposed to be moved. The application and notice of hearing shall specify the name(s) of the well(s) and operator(s) of the well(s) towards which the location exception well is moving, provided if the well is part of a multiunit horizontal well only the name(s) of the well(s) and operator(s) of the well(s) producing from the targeted common source(s) of supply shall be specified. The application and notice of hearing also shall be served, in the manner required above, upon the operator of any well located in an adjoining or cornering tract of land or drilling and spacing unit currently producing from the same common source of supply, if the requested well location is closer to the offsetting well than would be permitted under the applicable well location tolerances or requirements. Provided, however, if the applicant, or any other entity to be authorized to drill or otherwise operate the subject well, is the operator of any of the wells identified above, then the application and notice of hearing shall be served, in the manner required above, upon each working interest owner in any such well. This Section shall apply to any location exception for any completion in a nonhorizontal well, for any completion interval in the lateral of any horizontal well, and for the completion in the nonhorizontal portion of a horizontal well.

(b) An application and notice of hearing for an order granting a well location exception pursuant to this Section may also include a request for an exception to OAC 165:10-3-28(c)(2). The application and notice of hearing shall be served in the manner required in subsection (a) of this Section, and shall contain the information required in such subsection. Where an application includes requested relief for both a location exception and exception to OAC 165:10-3-28(c)(2), such application shall separately identify respondents for the location exception and respondents for the exception to OAC 165:10-3-28(c)(2).

(c) For any well other than a directionally drilled well or a horizontal well, the application and notice of hearing for a location exception shall specify the proposed or actual surface location of the well expressed in feet from the two nearest boundaries of the drilling and spacing unit, or, if no drilling and spacing unit has been established, from the two nearest boundaries of the mineral estate(s) upon which the well will be or has been drilled.

(d) For a directionally drilled well, the application and notice of hearing for a location exception shall specify the proposed or actual subsurface location of the well's entry into and the proposed or actual subsurface location of the well's exit from the common source of supply for which the location exception is requested, expressed in feet from the two nearest boundaries of the drilling and spacing unit or, if no drilling and spacing unit has been established, from the two nearest boundaries of the mineral estate(s) upon which the well will be or has been drilled. For purposes of this section, a directionally drilled well does not include a horizontal well.

(e) For a horizontal well, the application and notice of hearing for a location exception shall specify the proposed or actual subsurface location of the completion interval, as defined by OAC 165:10- 3-28, within the common source of supply for which the location exception is requested, expressed as the distance in feet from the nearest boundaries of the drilling and spacing unit or, if no drilling and spacing unit has been established, from the nearest boundaries of the mineral estate(s) upon which the well will be or has been drilled.

(f) The proposed subsurface location for a directionally drilled well or a horizontal well may be described in the application and notice of hearing as no closer than specified footages from the nearest boundaries of the drilling and spacing unit or, if no drilling and spacing unit has been established, from the nearest boundaries of the mineral estate(s) upon which the well will be drilled.

(g) At the time of hearing, a well's location, as set out in the application and notice of hearing, may be changed to another location that is not closer to the boundaries of the drilling and spacing unit or mineral estate(s) described in the application and notice of hearing, that is not closer to any offsetting well the operator of which, or any working interest owner in which, was required to be notified under this section, and that does not require notice to additional operators or working interest owners under this section.

(h) If at the time of the hearing on an application for a directionally drilled well or a horizontal well, the applicant does not have the results of the well survey required by OAC 165:10-3-27, then the Administrative Law Judge may recommend the issuance of an interim order granting the application and, if so, shall consider whether to adjust the allowable based on the potential locations of the well in each common source of supply for which the order is sought. All potential locations shall be considered in the interim order. If the directionally drilled well or the horizontal well is drilled and completed in compliance with the interim order, the well shall be assigned the allowable as set out in the interim order.

(i) If a directionally drilled or horizontal well is drilled and completed in compliance with an interim order approving a location exception, and no party of record has requested a hearing, the Commission may issue a final order approving the location exception, without further hearing, based on an administrative review by the Commission's Technical Services Department of the following documents, which the applicant must file with the Court Clerk for the record: the directional survey, the well completion report, and an "as drilled" plat constructed from the results of the directional survey. The applicant must also submit a proposed final order to the Commission's Technical Services Department in any case handled through the administrative review process. In the event the directional survey shows that a directionally drilled or horizontal well was not drilled and completed in compliance with the interim location exception order, the applicant shall notify the Commission and all of the parties entitled to notice in the original hearing establishing the interim order by filing an amended application in the case setting forth the actual subsurface locations of the well and by giving proper notice thereof. The actual subsurface locations of the well will be considered at a hearing conducted on the date specified in the interim location exception order, or on such date to which the hearing is continued.

(j) Notice of hearing on an application for an order granting a well location exception for a well drilled or to be drilled for oil or gas at a location other than that authorized by a rule or order of the Commission shall be published pursuant to OAC 165:5-7-1(n)(2).

(k) An application for an exception to the minimum distance requirements specified by OAC 165:10-3-28 (c)(2) and (c)(3) for the completion interval of a horizontal well, the notice of hearing for such exception proceeding and any resulting order in such proceeding shall include the API numbers of the existing well or wells being encroached upon by such horizontal well requiring such exception. Such application shall set forth the proposed subsurface location tolerance area or if available, the actual subsurface locations of the completion interval of such horizontal well requiring such exception. The proposed or actual subsurface locations, as applicable, of the completion interval of the horizontal well requiring such exception may be amended at the hearing on any such application. If the results of the well survey required by OAC 165:10-3-28(c)(1) are not available at the time of the hearing on such an application, the Administrative Law Judge may recommend the issuance of an order granting the application on an interim basis. Any final order issuing in such a proceeding shall specify the distance in feet between the completion interval of the subject horizontal well and the well or wells being encroached upon by such horizontal well requiring such exception.

(l) At the hearing, except for good cause shown, and if requested, submitted to the Technical Services Department for review prior to such hearing, a twelve section or otherwise appropriately sized production plat depicting offset wells located in units adjoining or cornering the units which are the subjects of the application, and a data sheet containing the legal locations, API numbers, operator names, total depths, completion dates, names of producing zones, cumulative production, status, and names of such offset wells, and the plugging dates of such wells, if applicable, and any other exhibits necessary to support the requested relief (e.g. isopach map or structure of the target zone(s), and cross section) shall be provided.

(m) The Commission may request that the record be reopened to receive additional information from the applicant prior to issuance of an order.

Okla. Admin. Code § 165:5-7-9

Amended at 10 Ok Reg 2591, eff 6-25-93; Amended at 14 Ok Reg 2474, eff 7-1-97; Amended at 24 Ok Reg 1781, eff 7-1-07; Amended at 27 Ok Reg 2098, eff 7-11-10; Amended at 29 Ok Reg 938, eff 7-1-12

Amended by Oklahoma Register, Volume 32, Issue 23, August 17, 2015, eff. 8/27/2015

Amended by Oklahoma Register, Volume 36, Issue 21, July 15, 2019, eff. 8/1/2019

Amended by Oklahoma Register, Volume 37, Issue 24, September 1, 2020, eff. 10/1/2020

Amended by Oklahoma Register, Volume 39, Issue 24, September 1, 2022, eff. 10/1/2022

Amended by Oklahoma Register, Volume 40, Issue 24, September 1, 2023, eff. 10/1/2023

Amended by Oklahoma Register, Volume 41, Issue 23, August 15, 2024, eff. 10/1/2024