Okla. Admin. Code § 165:25-2-91

Current through Vol. 42, No. 8, January 2, 2025

Section 165:25-2-91 - Electrical requirements

(a) All electrical work must be performed by a licensed electrician.

(b) All electrical wiring and electrical equipment must be of a type specified by and must be installed in accordance with NFPA 30A and NEC 70, National Electrical Code.

(c) Clearly identified and easily accessible switch(es) or circuit breaker(s) must be provided at a location remote from dispensing devices, including remote pumping systems, to shut off the power to all dispensing devices in the event of an emergency.

(d) Electrical equipment that was installed in compliance with an earlier state or national code will not require modification unless the equipment is hazardous to people or property.

Okla. Admin. Code § 165:25-2-91

Amended and renumbered from 165:25-2-77 at 23 Ok Reg 2261, eff 7-1-06; Amended at 25 Ok Reg 1867, eff 7-1-08

Amended by Oklahoma Register, Volume 35, Issue 24, September 4, 2018, eff. 10/1/2018