Current through Vol. 42, No. 7, December 16, 2024
Section 165:10-1-24 - Permitted well locations within standard drilling and spacing units(a) The permitted well location within any standard square drilling and spacing unit shall be the center of the unit. The permitted well locations within standard rectangular drilling and spacing units shall be the centers of alternate square tracts constituting the units (alternate halves of the units); provided, however, a well will be deemed drilled at the permitted location if drilled within the following tolerance areas: (1) Not less than 165 feet from the boundary of any standard 10-acre drilling and spacing unit or the proper square 10-acre tract within any standard 20-acre drilling and spacing unit.(2) Not less than 330 feet from the boundary of any standard 40-acre drilling and spacing unit or the proper square 40-acre tract within any standard 80-acre drilling and spacing unit.(3) Not less than 660-feet from the boundary of any standard 160-acre drilling and spacing unit or the proper square 160-acre tract within any standard 320-acre drilling and spacing unit. (4) Not less than 1320 feet from the boundary of any standard 640-acre drilling and spacing unit.(b) The proper square tract of a rectangular drilling and spacing unit established prior to January 1, 1971, for which a slot drilling pattern was prescribed, shall be the northeast quarter and the southwest quarter of the governmental section, quarter section, or quarter quarter section containing two abutting rectangular drilling and spacing units; provided, slot patterns may be established or re-established upon application, notice, and hearing where consistent with available geological and engineering information when necessary to prevent waste or protect correlative rights.(c) The permitted well location tolerance areas set out in (a) of this Section shall apply to each standard drilling and spacing unit heretofore or hereafter established, notwithstanding the provisions of any order of the Commission prescribing a different permitted well location tolerance area; provided, however, this Section shall not affect any adjusted allowable or penalty applied to any well by order of the Commission prior to the effective date of this Section, nor shall any well heretofore drilled within a then permitted tolerance area be deemed outside the permitted tolerance area by reason of this Section.(d) Wells drilled off-pattern without first obtaining an exception after notice and hearing by the Commission are hereby prohibited from producing either oil or gas. (e) Whenever permission is granted to drill a well at a location other than specified in this Chapter, the allowable or production therefrom, or both, may be adjusted for the protection of the correlative rights of all persons entitled to share in the common source of supply.(f) Unless the order granting a well location exception provides otherwise, the permission to drill the well at the excepted location shall expire twelve (12) months after the date of the order, unless a well was commenced at the excepted location on or before the expiration date. The order granting the well location exception will thereafter expire when the well is plugged, abandoned, or converted.(g) An application for an emergency order granting a well location exception may be granted if the applicant has obtained the written consent of the operator of each adjoining or cornering tract of land or drilling and spacing unit, currently producing from the same formation, toward which the well location is proposed to be moved. Provided, however, if the applicant is the operator of the well in an adjoining or cornering tract of land or drilling and spacing unit, currently producing from the same formation, toward which the well location is proposed to be moved, the applicant shall obtain the written consent of each working interest owner in such well. (1) Letters evidencing the written consent of off-set operators and working interest parties as described in this subsection shall be introduced and received into evidence at the time of the emergency hearing and reviewed. Copies of said letters shall be filed with the Court Clerk of the Commission.(2) If the written consent described in this subsection cannot be obtained, the applicant may send written notice to said non-consenting party giving that party at least five business days notice of the emergency hearing. If said non-consenting party fails to appear, then the emergency application shall be considered and may be granted without the non-consenting party's written consent. The applicant shall file an affidavit of mailing with the Court Clerk to prove the mailing of the five day notice.(h) If a spacing application is currently pending and the applicant or any party who owns the right to drill needs to commence a well prior to issuance of the spacing order, the applicant or party shall obtain an emergency order to commence such well and an emergency location exception order, or the Commission may issue a Permit to Drill for any well after a hearing for an emergency location exception order prior to the issuance of any such order. Any such Permit to Drill is subject to and must conform with the final provisions of any such order if: (1) The proposed well is off-pattern according to the existing spacing for any formation involved, or(2) The well is off-pattern according to 165:10-1-21 governing well patterns for unspaced areas.(i) Whenever an order permits an off-pattern well with a percentage penalty, the order permitting said well may provide, at the request of a party entitled to notice in the cause, for said party to have the right, at his sole cost and risk, to attend and monitor the initial potential testing and all subsequent annual testing of the proposed off-pattern well to ensure proper testing. If the order permits witnessing of tests as prescribed above, then the order shall further provide that at least five days prior to the initial potential testing and each subsequent annual testing of the proposed well, the operator of the well shall notify, in writing, all parties entitled to notice in the cause who requested to attend and monitor these tests of the date and time upon which said testing shall commence. Okla. Admin. Code § 165:10-1-24
Amended at 28 Ok Reg 1949, eff 7-11-11Amended by Oklahoma Register, Volume 32, Issue 23, August 17, 2015, eff. 8/27/2015.Amended by Oklahoma Register, Volume 39, Issue 24, September 1, 2022, eff. 10/1/2022