Ohio Admin. Code 4733-37-04

Current through all regulations passed and filed through June 10, 2024

Section 4733-37-04 - Measurement specifications

All measurements shall be made in accord with the following specifications:

(A) The surveyor shall keep all equipment used in the performance of surveying in proper repair and adjustment.

(B) Every determination of distance and direction shall be made either directly or indirectly in such a manner that the error in the distance or direction between any two points shall not exceed the reported distance divided by ten thousand (allowable error = reported distance divided by ten thousand, or stated as a ratio, one to ten thousand). Directional error thus shall not exceed one ten thousandths of a radian or twenty-one seconds of arc. When the reported distance is less than two hundred feet, the linear error shall not exceed 0.02 feet. The reported distance is the distance established by the survey.

(C) In all new descriptions and plats of survey, the lengths and directions of the lines shall be specified so that the mathematical error in closure of the property boundary does not exceed 0.02 feet in latitudes and 0.02 feet in departure.

(D) Surveys performed using metric measurements shall utilize the metric equivalents based upon the U.S. survey foot conversion factor.

Ohio Admin. Code 4733-37-04

Effective: 7/27/2022
Five Year Review (FYR) Dates: 4/25/2022 and 07/27/2022
Promulgated Under: 119.03
Statutory Authority: 4733.07
Rule Amplifies: 4733.20
Prior Effective Dates: 05/01/1980, 11/01/2003