N.D. Admin. Code 7-03.2-03-07

Current through Supplement No. 394, October, 2024

Section 7-03.2-03-07 - Sampling equipment

All sampling equipment must comply with requirements in the standard methods. Certified thermometers must be used to take samples. Certified thermometers must be accurate within two degrees Fahrenheit [1.11 degrees Celsius]. Their accuracy must be checked once during a six-month period. Certification must be obtained by a trained analyst approved by the commissioner. The analyst must maintain a log of the results of each thermometer certified. The log must contain the same information recorded on the thermometer and must show the certification history of all thermometers for which the analyst is responsible for one year. The following must be listed on certified thermometers:

1. Initials of the person calibrating the thermometer.

2. The date of calibration.

3. The date the calibration expires.

4. The thermometer owner's name or the thermometer number.

N.D. Admin Code 7-03.2-03-07

Effective October 1, 2009.

Amended by Administrative Rules Supplement 2024-393, July 2024, effective 7/1/2024.

General Authority: NDCC 4.1-25-50

Law Implemented: NDCC 4.1-25-26