Section 69-10-04-02.1 - Self-certificationSelf-certification to repair, test, and certify an operator's own commercial weighing and measuring devices is permitted only as provided in this section:
1. Only hazardous liquid pipeline operators, natural gas pipeline operators, and manufacturing-processing operators may self-certify;2. Applications must be submitted to the commission in writing;3. Commission approval is required annually; and4. Applications must address the following conditions:a. The person doing the self-certification must be registered with the commission under section 69-10-04-02. b. Upon testing, the device must be within commission-approved tolerance.c. Whenever a weighing or measuring device is recertified, the person or company recertifying that device shall, within seven working days, report the recertification to the commission. The report must clearly identify each device, the initial test results recorded during self-certification, and the test results upon recertification.d. A weights and measures inspector may randomly recertify any self-certified weighing or measuring device either by performing a test or by witnessing a test performed by a self-certified service person.N.D. Admin Code 69-10-04-02.1
Effective April 1, 1992; amended effective August 1, 1993; September 1, 1994; July 1, 1997; January 1, 2002; May 1, 2005.Amended by Administrative Rules Supplement 2020-379, January 2021, effective 1/1/2021.General Authority: NDCC 64-02-03
Law Implemented: NDCC 64-02-02, 64-02-13