N.D. Admin. Code 69-10-03-01

Current through Supplement No. 395, January, 2025

Section 69-10-03-01 - National institute of standards and technology (NIST) Handbook No. 44

Except as modified in this article, the specifications, tolerances, tests, and other technical requirements for commercial weighing and measuring devices in North Dakota must conform to the following sections and subsections of the 2020 edition of the United States department of commerce, NIST Handbook No. 44, which is adopted by reference: all of section 1, section 2 (except subsection 2.245), all of section 3 (except subsections 3.34, 3.36, 3.38, and 3.39). In the event of a conflict between the NIST Handbook No. 44 and North Dakota laws and rules, North Dakota laws and rules shall prevail. Copies of the handbook may be obtained from:

Public Service Commission

600 East Boulevard Avenue, Dept. 408

Bismarck, ND 58505-0480

N.D. Admin Code 69-10-03-01

Amended effective October 1, 1988; December 1, 1990; February 1, 1992; August 1, 1993; September 1, 1994; February 1, 1996; July 1, 1997; July 1, 1998; October 1, 1999; August 1, 2000; January 1, 2002; May 1, 2005.

Amended by Administrative Rules Supplement 2020-379, January 2021, effective 1/1/2021.

General Authority: NDCC 64-02-03

Law Implemented: NDCC 64-02-07