Current through Supplement No. 394, October, 2024
Section 69-05.2-09-06 - Permit applications - Operation plans - Transportation facilities1. Each application must contain a detailed description of each road, conveyor, or rail system to be constructed, used, or maintained. Appropriate maps, descriptions, profiles, and cross sections must be included to show: b. Specifications for each road width, gradient, surfacing material, cut, fill embankment, culvert, bridge, drainage ditch, low-water crossing, and drainage structure. c. Plans for stabilizing road cut and fill embankments, ditches, drains, and other side slopes. d. Specifications for each road to be located in the channel of an intermittent or perennial stream under subsection 4 of section 69-05.2-24-01. e. Specifications for each ford of intermittent or perennial streams to be used as a temporary route under subsection 4 of section 69-05.2-24-03. f. Measures to obtain commission approval for altering or relocating a natural drainageway under subdivision e of subsection 5 of section 69-05.2-24-03. g. Specifications for each low-water crossing of intermittent or perennial streams to provide maximum protection of the stream under subdivision f of subsection 5 of section 69-05.2-24-03. h. Plans to remove and reclaim each road not retained under the proposed postmining land use, and a schedule for removal and reclamation. 2. The plans and drawings of each primary road must be prepared by, or under the direction of and certified by, a qualified registered professional engineer with experience in the design and construction of roads. The certification must state that the plans and drawings meet the requirements of this article, current and prudent engineering practices, and any design criteria established by the commission. N.D. Admin Code 69-05.2-09-06
Effective August 1, 1980; amended effective May 1, 1990; May 1, 1992.General Authority: NDCC 38-14.1-03
Law Implemented: NDCC 38-14.1-14