N.D. Admin. Code 62-04-05-03

Current through Supplement No. 394, October, 2024

Section 62-04-05-03 - Horizontal piping

1. Horizontal pipe of the following materials shall be supported at not more than the distance intervals shown.

2. Steel threaded pipe - one-inch [2.54 centimeter] diameter or less - eight foot [2.44 meter] intervals. Over one-inch [2.54 centimeter] diameter -ten foot [3.05 meter] intervals.

3. Copper tube, one and one-fourth inch [31.75 millimeter] or less - six foot [1.83 meter] intervals.

4. Copper tube, one and one-half inch [38.1 millimeter] or over - ten foot [3.05 meter] intervals.

General Authority: NDCC 43-18.1-03

Law Implemented: NDCC 43-18.1-04

N.D. Admin Code 62-04-05-03