Section 6-02-02-09 - Registration and license of aircraft and equipment standards1.Registration. All aircraft operated in aerial application requiring a North Dakota aerial applicator's license shall be registered with the North Dakota aeronautics commission prior to actual use of the aircraft in this state and prior to the issuance of an aerial applicator's license. Annual registration fees shall be in accordance with the schedule set forth in North Dakota Century Code sections 2-05-11 and 2-05-18 and shall be paid in full in advance.2.Equipment standards. Each aircraft used for aerial application shall be satisfactorily equipped with a positive shutoff device at each discharge nozzle (manually controlled shutoff valves, spring-loaded valves, or ball checks will be acceptable), which will absolutely prevent the dissemination of material on any portion of the terrain over which flight is made other than the area being treated or sprayed. Each aircraft must be satisfactorily equipped with a shutoff between hopper and discharge orifice. The entire aircraft must be in good usable condition and free from any obvious points of leakage.N.D. Admin Code 6-02-02-09
Amended by Administrative Rules Supplement 2016-360, April 2016, effective 4/1/2016.General Authority: NDCC 2-05-18
Law Implemented: NDCC 2-05-18