N.D. Admin. Code 43-02-03-48

Current through Supplement No. 394, October, 2024

Section 43-02-03-48 - Measurement of oil

Oil production may not be transported from a well premises , central production facility, treating plant, or saltwater handling facility until its volume has been determined through the use of properly calibrated meter measurements or tank measurements. All meter and tank measurements, and volume determinations must conform to American petroleum institute standards and be corrected to a base temperature of sixty degrees Fahrenheit [15.56 degrees Celsius] and fourteen and seventy-three hundredths pounds per square inch absolute [1034.19 grams per square centimeter].

N.D. Admin Code 43-02-03-48

Amended by Administrative Rules Supplement 2014-352, April 2014, effective April 1, 2014. .

Amended by Administrative Rules Supplement 2016-362, October 2016, effective 10/1/2016.

General Authority: NDCC 38-08-04

Law Implemented: NDCC 38-08-04