Section 33.1-24-06-73 - Information required for tanksIf hazardous waste is stored or treated in tanks, the following information must be kept at the facility:
1. A written assessment that is reviewed and certified by a qualified professional engineer on the structural integrity and suitability for handling hazardous waste of each tank system, as required under sections 33.1-24-05-1101 and 33.1-24-05-1102.2. Dimensions and capacity of each tank.3. Description of feed systems, safety cutoff, bypass systems, and pressure controls (for example, vents).4. A diagram of piping, instrumentation, and process flow for each tank system.5. A description of materials and equipment used to provide external corrosion protection, as required under section 33.1-24-05-1101.6. For new tank systems, a detailed description of how the tank systems will be installed in compliance with sections 33.1-24-05-1102 and 33.1-24-05-1104.7. Detailed plans and description of how the secondary containment system for each tank system is or will be designed, constructed, and operated to meet the requirements of sections 33.1-24-05-1105 and 33.1-24-05-1106.9. Description of controls and practices to prevent spills and overflows, as required under section 33.1-24-05-1108.10. For tank systems in which ignitable, reactive, or incompatible wastes are to be stored or treated, a description of how operating procedures and tank system and facility design will achieve compliance with the requirements of sections 33.1-24-05-1112 and 33.1-24-05-1113.11. Information on air emission control equipment as required by section 33.1-24-06-80.N.D. Admin Code 33.1-24-06-73
Adopted by Administrative Rules Supplement 370, October 2018, effective 1/1/2019.General Authority: NDCC 23.1-04-03; S.L. 2017, ch. 199, § 1
Law Implemented: NDCC 23.1-04-03, 23.1-04-05, 23.1-04-08; S.L. 2017, ch. 199, § 19