Section 33.1-15-06-04 - Continuous emission monitoring requirements1.General provisions.a. For sources subject to continuous emission monitoring requirements in their permit to operate, the monitoring systems must be used to demonstrate compliance with emission limits on a continuous basis after the initial compliance test and certification of the system.b. Emission rates must be recorded in the units of the applicable standard. Conversion of monitor data to an emission rate expressed in pounds per million British thermal units [nanogram per joule] shall be calculated in accordance with the equations in section 33.1-15-06-03. Equations for calculating emission rates with different units will be supplied by the department.2.Installation, operation, and certification. The installation operation, and certification of continuous monitoring systems and monitoring devices must comply with the provisions of 33.1-15-12 that apply to monitoring systems and monitoring devices.3.Quality assurance. All continuous monitoring systems and monitoring devices must be recertified in accordance with the provisions of appendix B of 33.1-15-12 every three years unless otherwise directed.N.D. Admin Code 33.1-15-06-04
Adopted by Administrative Rules Supplement 370, October 2018, effective 1/1/2019.General Authority: NDCC 23.1-06-04; S.L. 2017, ch. 199, § 1
Law Implemented: NDCC 23.1-06-08; S.L. 2017, ch. 199, § 21