Section 33-24-08-23 - Repairs allowedOwners and operators of underground storage tank systems must ensure that repairs will prevent releases due to structural failure or corrosion as long as the underground storage tank system is used to store regulated substances. The repairs must meet the following requirements:
1. Repairs to underground storage tank systems must be properly conducted in accordance with a code of practice developed by a nationally recognized association or an independent testing laboratory. (NOTE: The following codes of practice may be used to comply with this subsection: National Fire Protection Association Standard 30, "Flammable and Combustible Liquids Code"; American Petroleum Institute Recommended Practice RP 2200, "Repairing Crude Oil, Liquefied Petroleum Gas, and Product Pipelines"; American Petroleum Institute Recommended Practice RP 1631, "Recommended Practice for the Interior Lining and Periodic Inspection Underground Storage Tanks"; National Fire Protection Association Standard 326, "Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair"; National Leak Prevention Association Standard 631, Chapter A, "Entry, Cleaning, Interior Inspection, Repair, and Lining of Underground Storage Tanks "; Steel Tank Institute Recommended Practice R972, "Recommended Practice for the Addition of Supplemental Anodes to STI-P3® Tanks"; NACE International Standard Practice SP 0285, "External Control of Underground Storage Tank Systems by Cathodic Protection"; or Fiberglass Tank and Pipe Institute Recommended Practice T-95-02, "Remanufacturing of Fiberglass Reinforced Plastic (FRP) Underground Storage Tanks".)
2. Repairs to fiberglass-reinforced plastic tanks may be made by the manufacturer's authorized representatives or in accordance with a code of practice developed by a nationally recognized association or an independent testing laboratory;3. Metal pipe sections and fittings that have released product as a result of corrosion or other damage must be replaced. Noncorrodible pipes and fittings may be repaired in accordance with the manufacturer's specifications;4. Repairs to secondary containment areas of tanks and piping used for interstitial monitoring and to containment sumps used for interstitial monitoring of piping must have the secondary containment tested for tightness according to the manufacturer's instructions, a code of practice developed by a nationally recognized association or independent testing laboratory, or according to requirements established by the department within 30 days following the date of completion of the repair. All other repairs to tanks and piping must be tightness tested in accordance with subsection 3 of section 33-24-08-33 and subsection 2 of section 33-24-08-34 within thirty days following the date of the completion of the repair except as provided in subdivisions a through c: a. The repaired tank is internally inspected in accordance with a code of practice developed by a nationally recognized association or an independent testing laboratory;b. The repaired portion of the underground storage tank system is monitored monthly for releases in accordance with a method specified in subsections 4 through 9 of section 33-24-08-33; orc. Another test method is used that is determined by the department to be no less protective of human health and the environment than those listed above; (NOTE: The following codes of practice may be used to comply with subsection 4 of this subsection: Steel Tank Institute Recommended Practice R012, "Recommended Practice for Interstitial Tightness Testing of Existing Underground Double Wall Steel Tanks"; or Fiberglass Tank and Pipe Institute Protocol, "Field Test Protocol for Testing the Annular Space of Installed Underground Fiberglass Double and Triple-Wall Tanks with Dry Annular Space"; Petroleum Equipment Institute Recommended Practice RP1200, "Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities".)
5. Within six months following the repair of any cathodically protected underground storage tank system, the cathodic protection system must be tested in accordance with subsections 2 and 3 of section 33-24-08-21 to ensure that it is operating properly; and6. Within thirty days following any repair to spill or overfill prevention equipment, the repaired spill or overfill prevention equipment must be tested or inspected, as appropriate, in accordance with section 33-24-08-25 to ensure it is operating properly.7. Underground storage tank system owners and operators must maintain records, in accordance with section 33-24-08-24, of each repair until the underground storage tank system is permanently closed or undergoes a change-in-service pursuant to section 33-24-08-61.N.D. Admin Code 33-24-08-23
Effective December 1, 1989.Amended by Administrative Rules Supplement 368, April 2018, effective 4/1/2018.General Authority: NDCC 23-20.3-03, 23-20.3-04.1
Law Implemented: NDCC 23-20.3-04.1