N.D. Admin. Code 33-24-02-64

Current through Supplement No. 393, July, 2024

Section 33-24-02-64 - General operating requirements

1. Hazardous secondary materials or treatment reagents must not be placed in a tank system if they could cause the tank, its ancillary equipment, or the containment system to rupture, leak, corrode, or otherwise fail.

2. The remanufacturer or other person that stores or treats the hazardous secondary material must use appropriate controls and practices to prevent spills and overflows from tank or containment systems. These include at a minimum:

a. Spill prevention controls (for example, check valves, dry disconnect couplings);

b. Overfill prevention controls (for example, level sensing devices, high level alarms, automatic feed cutoff, or bypass to a standby tank); and

c. Maintenance of sufficient freeboard in uncovered tanks to prevent overtopping by wave or wind action or by precipitation.

3. The remanufacturer or other person that stores or treats the hazardous secondary material shall comply with the requirements of section 33-24-02-66 if a leak or spill occurs in the tank system.

N.D. Admin Code 33-24-02-64

Adopted by Administrative Rules Supplement 2016-359, January 2016, effective 1/1/2016.

General Authority: NDCC 23-20.3-03

Law Implemented: NDCC 23-20.3-03, 23-20.3-04