15A N.C. Admin. Code 2Q.0112

Current through Register Vol. 38, No. 24, June 17, 2024

Section 02Q .0112 - APPLICATIONS REQUIRING PROFESSIONAL ENGINEER SEAL

(a) If required by G.S. 89C, a professional engineer shall seal technical portions of air permit applications for new sources and modifications of existing sources as defined in 15A NCAC 02Q .0103 that involve:

(1) design;

(2) determination of applicability and appropriateness; or

(3) determination and interpretation of performance of air pollution capture and control systems.

(b) The requirements of Paragraph (a) of this Rule shall not apply to the following:

(1) any source with non-optional air pollution control equipment that constitutes an integral part of the process equipment as originally designed and manufactured by the equipment supplier;

(2) sources that are permitted pursuant to 15A NCAC 02Q .0310 or 02Q .0509;

(3) paint spray booths without air pollution capture and control systems for volatile organic compound emissions;

(4) particulate emission sources with air flow rates of less than or equal to 10,000 actual cubic feet per minute;

(5) nonmetallic mineral processing plants with wet suppression control systems for particulate emissions; or

(6) permit renewal if no modifications are included in the permit renewal application.

15A N.C. Admin. Code 02Q .0112

Authority G.S. 143-215.3(a)(1); 143-215.108;
RRC Objection Eff. November 17, 1994 due to lack of statutory authority;
Eff. February 1, 1995;
Readopted Eff. April 1, 2018.

Authority G.S. 143-215.3(a)(1); 143-215.108;
RRC Objection Eff. 11/17/1994 due to lack of statutory authority;
Eff. 2/1/1995.

Readopted by North Carolina Register Volume 32, Issue 21, May 1, 2018 effective 4/1/2018.