N.Y. Comp. Codes R. & Regs. tit. 9 § 6210.7
Current through Register Vol. 46, No. 43, October 23, 2024
(a) For the production of paper ballots or ballot faces for DRE voting systems, the county board shall contract with a printer or use in-house print services that have the requisite expertise, staff, an d equipment for printing ballots of the complexity and in the volume require d for the conduct of elections in that county, and that ensures delivery of finished ballots in time to comply with the relevant provisions of the Election Law and the election calendar.(b) Detailed specifications for production of ballots shall be supplied to the county board by the voting system vendor. These shall include but not be limited to particulars of the system's ballot such as weight, grain and color of stock; dimensions of ballot faces, ballots and ballot cards; corner cuts; perforations, both for ballot boundaries and for stub boundaries, when appropriate; ballot positions, sensitive areas and voting targets; pre- marks for imprinting of ballot configuration information; printing registration and tolerances; ink; use of drying powder; and packaging of printed ballots for shipment and for storage until time of use. The county board shall transmit these specifications to the printer chosen to produce its ballots.(c) In the first year that the voting system is in use, a copy of the final form and arrangement of each ballot configuration shall be filed with the State Board.(d) Ballots shall be identified by ballot configuration, using marks which are machine readable and human readable text. A sheet of ballot paper becomes a ballot when the contents of the ballot are printed thereon.(e) Ballots to be used with poll site optical scan voting systems, shall be in a form consistent with Election Law. Each ballot shall have a numbered stub which can be separated from it along a perforated boundary. Such ballot shall be detached from the numbered stub prior to the election inspector giving the ballot to the voter and be retained by the county board in a manner consistent with election-related document retention requirements. Ballot stubs, however, shall not be required if the board of elections implements procedures to provide for ballot accountability equivalent to the use of ballot stubs as provided for in in sub division 6210.10 (b) of this Part. (1) The ballot stubs, when required, shall be sequentially numbered, and shall include the date of the election, the political subdivision in which the ballot is valid, and in a primary election, the name of the party conducting the primary, and further, stubs may be color coded, to correspond to same.(2) Ballot stubs, when required, shall include spaces for inspectors to indicate with their initials, whether the ballot was used for affidavit or emergency purposes.(3) Ballots shall be bound in packages of 100, or in such other increments as a county board may, by written procedure, deem appropriate. When ballot stubs are used, binding shall be by staples, to help ensure ballot accountability. Packages of ballots not requiring ballot stubs shall be shrink wrapped or otherwise sealed in a heat-sealed or gummed bag with a cover.(4) Ballot packages shall have a cover, on which shall be printed the date of the election, the political subdivision in which the ballot package shall be valid, the number of ballots therein, the sheet number of a ballot when it is part of a multiple sheet ballot, the range of sequential ballot stub numbers contained therein, if applicable, and such other administrative information as the county board may deem necessary. In primary elections, booklet covers shall include the name of the party conducting a primary, and may be color coded, to correspond to same.(5) When more than one ballot package is to be used in any election district, a transmittal sheet shall accompany the packages, which shall specify how many packages are included [in the inspector supply bag], the number of ballots in total and the complete range of sequential ballot stub numbers for that district, if applicable, and shall further provide a space or spaces for inspectors to confirm receipt of all ballots.(6) Ballot packages and any transmittal sheet, shall be delivered to inspectors with other election day supplies, in a separate, secure, sealed and labeled container, envelope or pouch.(7) Only one ballot package at a time should be on the inspector table, and the remaining booklets shall be kept in their secure container, envelope or pouch.(8) Upon opening a package of ballots that are not stubbed, the inspectors shall count the number of ballots in such package to ensure it is the number indicated on the coversheet. When all ballots in a package have been used, leaving only the cover and the stapled pad of stubs, in the case of ballots that are stubbed, such package shall be returned to the ballot package container/ envelope/pouch and the next appropriately numbered ballot package shall be removed for use.(9) After the close of polls, the transmittal sheet shall be completed by the inspectors, indicating which packages were completely used, partially used, or not used. The ballot package container/ envelope/pouch shall be sealed and returned to the county board with all other election day supplies.(f) The county board shall cause its respective printer(s) to certify to the county board, upon delivery of ballots ordered: (1) the actual number of ballots printed;(2) the number of ballots delivered; and(3) that all other ballots printed have been destroyed The county board shall inventory all ballots and ensure the security of any and all ballots while they are in the possession of the county board.
(g) For central count paper-based voting systems, ballots printed for absentee voting, and those printed for emergency, special and affidavit purposes shall be tabulated by batch, and be subject to all appropriate pro- visions of these regulations. The county board shall provide a means by which affidavit, emergency, and special ballots shall be distinguished from absentee ballots.(h) Ballots With Multiple Sheets. A board of elections may provide a voter a ballot consisting of more than one separate, unconnected sheets, provided: (1) The ballot includes a statement that the voter must receive the number of ballot sheets the voter is entitled to, specifying such number. Such notice may be substantially in the following form: "Your ballot consists of (here insert the total number of sheets comprising the ballot) separate sheets. All of the sheets must be provided to you at the same time."(2) Each ballot sheet shall be prominently labeled as "ballot sheet (here insert the number of the ballot sheet) of (here insert the total number of sheets comprising the ballot)(3) Ballot accountability and reconciliation procedures shall apply to each sheet of a multiple sheet ballot. Each sheet of a multiple sheet ballot may be spoiled without spoiling another sheet comprising the same multiple sheet ballot.(i) Ballots Printed on Demand (1) Ballot on demand printers and supplies shall be secured a s provided by the procedures of the State Board of Elections.(2) Inspectors shall keep a record of the number of ballots of each ballot style printed by a ballot on demand printer. Such ballots shall be considered delivered to the inspectors at the time of printing, and the inspectors shall record the distribution of such ballots in the same manner as provided for in this section. Logs maintained by the ballot on demand printer application may be used by the inspectors to meet the requirements of this paragraph to record the number of ballots printed.N.Y. Comp. Codes R. & Regs. Tit. 9 § 6210.7
Amended, New York State Register May 21, 2014/Volume XXXVI, Issue 20, eff. 5/21/2014Amended, New York State Register January 15, 2019/Volume XLII, Issue 02, eff. 1/15/2020